SEPARO P34I

Separo P34I is a 50 Watts per channel stereo integrated EL-34 push-pull amplifier, operating in "Ultra-Linear" mode, which offers triode like lower distortion and pentode like higher power efficiency.  P34I uses a minimum amount of NFB (Negative FeedBack), i.e., 2.5 dB to ensure a warm and detailed reproduction of sound.  Without the typically large NFB in a psuh-pull amplifier to cover up distortion, P34I depends on the clean outouts of good output transformers to achieve the specification below at high power.  

Features and Specifications*

• Integrated amplifier with CD/TUNER/AUX1/AUX2 inputs
• 50 Watts r.m.s. per channel
• Potted transformers 
• Independently adjustable bias (one per tube, four total)
• Ultra Linear Mode
• Point-to-point wiring (except for the bias control)
• Choke loaded filter
• 5-way binding posts for 4 and 8 Ohms speakers
• Total Harmonic Distortion (T.H.D.) @ 1kHz, 8 Ohms:
  • Less than 1% at 35 Watts
  • Less than 2% at 45 Watts
  • Less than 5% at 50 Watts
• Frequency Response **
  • 15Hz - 35 kHz (-3 dB)
  • 20Hz - 22 kHz (-1 dB)
• Background Noise Level: Less than 3.5 mV r.m.s. at 8 Ohms
• Tube Complements: EL34EH or 6CA7EH x 4, 6SN7EH x2 or equivalent, and 12AU7 x 2
• Input Impedance: 47 KOhms
• Power Consumption: 220 Watts
• Dimension: 17” (W) x 15” (D) x 8” (H)
• Weight: 58 lbs

* Specifications are typical and subject to change without notice
** Distortion is higher at upper and lower frequencies